Replacing a Scratched Windscreen

Filed under:Cars + Rides, Nothing But Hardware — posted on September 12, 2009 @ 6:10 pm

Replacing or fixing a scratched windshield can be one of the easiest, or one of the most daunting, experiences that you can have as a automobile owner depending on the approach that you take. windshield replacement is not an easy process; it demands strength, a pair of stable hands, and a willingness to follow instructions carefully.

All vehicles are unique, most frequently, loosening the urethane that supports the windscreen in position will be the first step, then cautiously lifting it out. Next, using the a utility knife the remaining urethane must be cleared away to make room for the new windshield. The new windscreen is then affixed into place, and enforced with bolts. When replacing a windshield, it is very important to make sure that the new urethane seal is put in place the right way, because any leaks can cause wind to get into the car, totally ruining the experience of driving.

If you discover a chip on the windscreen, it may be feasible to repair it. Windscreen repair is an simple process. Every auto parts store these days have repair kits, and involves sealing off the chip with resin. The resin the clear and does not leave a mark, and once the procedure is completed, it is nearly impossible to distinguish that the windshield was ever chipped off. The repair kits can often be unreliable for restoring large cracks, however, and can sometimes make the problem worse, needing a replacement. This job is generally better left to professionals.

If you decide to let a professional deal with your windscreen problems, you may be delighted to find that this is one of the few auto repair jobs that does not require your car to be brought to a garage. Many companies offer mobile repair services, which can be completed in a matter of an hour or less, even if the windshield requires to be replaced entirely. Mobile windshield repair services are able to perform the service at the comfort of your own home, or at work, making it an extremely convenient one.

Crunchberries Monthly

Filed under:Best Information, Nothing But Hardware, University of Health — posted on September 2, 2009 @ 10:48 pm

Want to knwo what I’ve been up to for the last few weeks? Here it is. I hope you don’t mind my sharing these with you? Are you looking for home security or some extra energy?

Is it going to rain?

Did some back country hiking and camping a couple weeks ago. We were going to meet some friends up at a trail in the mountains and hike in to camp. Bought a durable heavy duty camping tent online for the weeklong outing. It was a relief to open the door the afternoon we were driving in - and saw the tent. Sometimes I worry when I order online that I’ll get the wrong stuff. This was just right. Expedited shipping is totally the way to go. I will enver get tired of hiking or biking into the back country for camping trips. I want to do it again soon!

Security

In planning for a week long camping trip, I thought it would be a good time now to get a security system for the house. As a family we started getting more electronics, photos, etc. Memories. It’s important to keep your life and memories and loved ones secure. We searched through the phone book first but ultimately found the best security system deals online. Installing the security system was a breeze. Turns out we didn’t have to worry but we felt safer while traveling.

eFusjon Opportunity

Living in a tent for a week can be tiresome. Efusjon saved us on this trip. It is totally worth the money. The added energy is definitely something we were grateful for with all of the crazy camping activities we did. Efusjon is great for the drink and for the income opportunity. We bought in for the drink and you should too. It’s worth every penny. It’s about time to visit that link!

I’m climbing the hill to success. Hope these sites are useful for you!

ESR Meter - The Capabilities To Check Beyond Electrolytic Capacitor

Filed under:Nothing But Hardware — posted on April 1, 2008 @ 12:36 pm

There is something good about esr meter because besides electrolytic capacitor it can be use to measure other type of capacitors such as the non polarity capacitor. From esr meter specification, it is usually mentioned only checking the electrolytic type. When i began to experiment with the Dick Smith ESR Meter i found that it have the capabilities to check other type of capacitors as well.

However it is limited to checking capacitor in the higher value only such as .1uf(104), .22uf(224), 1uf(105) and etc. Lower capacitance value don’t get any reading from the esr meter due to it can only read until 99 ohms. Perhaps other esr meter such as the B & K esr meter have the range to check it.

You will even be surprised to see that the dick smith esr meter can check the non-polarity capacitor in-circuit (without removing the cap).

True case example-Monitor came in with display jumping horizontally. You can see a bunch of horizontal black lines across the top display (picture). From experienced it will tell you that vertical section have problem. I begin to troubleshoot the vertical section.
Supply voltage checked ok, vertical driver and oscillator IC replaced, all components connected or nearby vertical driver and oscillator ic have been checked ok. By the way I used digital capacitance meter to check the non-polarity cap and esr meter to check the electrolytic cap. The problem is still there and can’t be solve!

When i use Dick Smith ESR Meter to compare the esr value of a non-polarity capacitor located near the vertical
driver ic, i noticed that there is a big different in the esr value. The good esr value for a .22uf non-polarity cap is between 6.5 to 7 ohm but the spoilt one have a value of 14 ohm! Almost double the value, that’s why the display jump. The good thing is i discovered the culprit
while the capacitor still in the circuit which mean this esr meter can check non-polarity cap in-circuit. However my recommendation for you is to solder out one leg and check unless you already have the experienced in checking components on board. Replacing the cap solved the display problem.

Conclusion-In order to accurately test a non-polarity capacitor, besides checking the capacitance value and using analog meter to check the charge and discharge to see if it has develop
any short circuit when under load, you are also required to check the esr value as well.

Jestine Yong is a electronic repairer and a writer. For more information about electronic repair please visit his website at
http://www.noahtec.com/electronic-repair-articles.htm